Neo-Aerodynamic

Pic 2

Neo-Aerodynamic Ltd Company

Data sheet for Residential Wind Turbine

 

Physical appearance:

  • Rotor
    • Diameter : 120"
    • Portability: Assemble on-site
    • Wing span 160 square feet
    • Wings
      • Unit per set 8
      • Height 10'
      • Chord 22"
      • Material Aluminum
      • Gauge 0.030"
      • Shape resemble NACA 747a15
      • Reinforce vertical internal frame 3
      • Weight: 20 pounds
    • Central Vane
      • Unit per set 4
      • Height 10'
      • Width 16"
      • Material Aluminum
      • Gauge 0.030
      • Shape curve
      • Weight
    • Arms
      • Unit per set 8
      • Length 5' 6"
      • Material Galvanized steel
      • Type 1-1/4 square tube
      • Gauge 1/16
      • Shape Wrap around the wing.
      • Contour bending.
      • Weight
    • Shaft
      • Unit per set 1
      • Height 10' 6:
      • Material Galvanized steel
      • Type 2" 3/16 square tube
      • Gauge 3/16
      • Attachment: combination of steel and galvanized
      • Bearings (2) Thrust bearing.
      • Weight.

  • Superstructure
    • Shape  Hexagon
    • height 12' - 24' optional
    • Portability  Assemble on-site, self supported, movable.
    • Gauge Variable
    • Weight 

  • Generator
    • Model: MT220
    • Manufacture dayton
    • Name plate: 3 phase 10HP 1800RPM 480V
    • Frame: C-face
    • Operating as single phase
    • Transmission : direct drive
    • Weight

  • Electrical
    • Grid tie
    • Enclosure: GE model . . .
    • Max capacity 600V 70A
    • Operating 3 wire split, single phase US 220 for residential - (2 leg of industrial 3 phase and a ground do not work)
    • Minimum on-site requirement: Residential 220V outlet protect by its none sharing circuit breaker. - We need to remind that the 2 leg of a 3 phase will damage your system.

  • Controller setup
    • Cut-on user selectable (default 4MPH)
    • Cut-off - at low end user selectable (default 3MPH)
    • Cut-off - at high end user selectable (default 30MPH)

  • Power output chart: Please refer to realtime or typical snapshots.
  • Estimate assemble and setup time 4 hours.
  • Permanent foundation required: None.
  • Electrical hook-up: Could be as simple as plug-in.
  • Special equipment needed for installation: Scaffold, machine or manual winch.

Usability:

  • Grid tied, Single phase (240V)
  • Maintenance: Minimum, mainly are preventive.
  • Stack-able

Performing Field Data

  • Start making electricity.
  • Cut off.
  • Actual output.
    • At 10 mph
    • At 12 mph
    • At 15 mph
    • At 20 mph
    • At 25 mph

Questions You may ask.

1- If I am not please with the device can I return? - Yes in 90 days it it's not damaged

2- Can I buy spare part: specially airfoils? - Yes

3- How about product liability: It's your option.

4- Can I install on my roof top?- For liability reason we have to say no even we know it will have better performance.